DA2010CB-WF DA2010CB by Aqua Blue H20D External Inline 1/4 Push in filter”

THIS FILTER IS 1/4″ BOTH ENDS PUSH-IN CONNECTION AND FITS TO ALL BRAND FRIDGE OR ICE MAKER
AQUA BLUE H2O COMPATIBLE EXTERNAL INLINE FRIDGE WATER FILTERS DA2010CB
THIS IS A SAMSUNG, LG, Fisher & Paykel, WESTINGHOUSE, FRIGIDAIRE, ELETROLUX 1450970 REPLACEMENT FILTER 240396407, 1458682, IN1211-2, IN1011-2, 3M Aqua Pure AP717

also Fit BFFR or IC-100Q-FRG, TF2/3-UDF and IL2323PB

Installation Instructions

This is for external compatible water filters with 1/4″ pushfit connections
You are buying Superior Quality compatible filters with push-fit connections.

Installation and replacement procedure for the Compatible External fridge water filter:

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 – 10mm and you will feel it hit home.

4. IMPORTANT – Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.

5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.

Note: The green light changes to orange after five months to indicate that you should soon change the water filter. It changes to red after an additional one month (6 months after the water filter was changed or installed) to indicate that you must change the water filter. If the water filter indicator lights up red, press the ICE TIMER and ICE MODE buttons at the same time for about three seconds to reset the water filter indication light from red to green.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture’s recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty

As with all built-in refrigerator water filters, the compatible external fridge water filter does not remove Fluoride.

Note: The filter provides cleaner, fresher water ice.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water

Compatible Filters & Fridges

External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges replaces: External in-line Fridge Filter, 1450970 & many other filter part numbers, will fit all brands of fridges that use an external in-line fridge filter.
Most fridges with internal filters can be converted over to use these filters.

Suitable for: External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges

3M Aqua Pure AP717, AP-717, CFS717, CFS-717

BFFR or IC-100Q-FRG

Suits the Following Fridge Models:

ESE6977SC, ESE6977SE, ESE6077SF, ESE6077SE, ESE6077SC,WSE6970SF, WSE6970SA

Fits the following refrigerators models:

Westinghouse fridge filters
WSE6070PB, WSE6070SB, WSE6070WB, WSE6070WF, WSE6070SF WSE6970WF, WSE6070WF

Electrolux fridge filter
ESE6977S, CESE6977SE, ESE6077SC, ESE6077SE, ESE6077SF, ESE6977SF, ESE6077SG, ESE6977SG

GE : tfx27fh

Specification

The Aqua Blue H2O Compatible External Water Filters Operating Specifications are as Follows: